3D-Metal-Printer FL300M Powder Bound Filament Printing

Perfection in 3D metal printing technology: FL300M Powder Bound Filament Printing System developed by FuseLab in collaboration with JLOX-Metal-Filament. Our new extruder technology delivers high performance 3D printing while maintaining the highest reliability standards.

3D printing technology Fused Filament Fabrication (FFF)

Fuselab Patented Extruder Technology: EXTRUDER FL300M - some facts:

  • Integrated motor: Extruder motor with internal filament feedthrough for a compact and lightweight design.
  • Multi-contact feeder: Reliable filament feeding even for the most demanding materials like powder bound filaments.
    Heater Unit: Slim heater design for an unobstructed view. Internal nozzle geometry optimized for powder bound filaments.
  • Dual Independent extruders
  • Printing volume: 300mm x 300mm x 290mm (dual extruder) and 340mm x 300mm x 290mm (single extruder)


  • Extruder technology: FuseLAB 3D patented rollerdrive technology
  • Nozzle diameters: 0.2mm | 0.3mm | 0.4mm | 0.6mm | 0.8mm
  • Max. extruder temperature: 300 °C
  • Heated build platform: Max. temperature 110 °C
  • Polyetherimide (PEI) top surface
  • Layer height: 0.05-1mm
  • Build chamber: Fully enclosed and passively heated up to 40 °C
  • Electronics: 32bit 300Mhz motion controller with quad-core ARM SBC and Fuselab embedded Linux distribution
  • Display: 7 inch TFT capacitive touch display
  • Air filtration: HEPA + active carbon filter, fully closed with automatic pause when door opend
  • Auto park extruders prevents accidental nozzle contact
  • Heated bed: Redundant temperature sensors for overtemperature protection
  • Filament diameter: 2.85mm
  • Supported materials: Metal and ceramic powder bound filaments from all manufactures (open system)
  • 316L stainless steel | 17-4 PH stainless steel | H13 | Zirconia SiC | Common Polymers (ABS, ASA, PLA, PETG, …) | and more


  • Spool Size: Up to 2 spools of 300mm diameter and 100mm wide
  • Power input: 100 – 240V AC / 6.5-2.7A AC / 50-60Hz / Max. 650 Watt
  • Slicer software: Simplify 3D | Cura
  • Connectivity: WiFi | Ethernet
  • Data transfer: Wifi | Ethernet | USB stick
  • External dimensions 648mm x 589mm x 1211mm (W x D x H)
  • Weight approx. 90kg