Showcase Prototypes with ROHS and ULV0-94 standards A company in the field of medical innovations approached Prototech Asia with a challenging project. The company needed several assembled parts, some of which had to be produced in large sizes and others transparent. The product Our client in the medical sector was developing a new x ray scanner equipment and contacted us for the production of some assembly parts. The project consisted in the production of 14 references, each it to be produced in batches of 5 pieces. For some of them, we eventually produced 10 copies. In addition, 7 references had to be produced with a polished-mirror finish to be transparent, while ABS PU parts had to be painted in RAL 9016. Eventually, a reference had to be made out of metal. The challenges The project involved several technical difficulties: The parts had to comply with the UL94-V0 standard. In fact, this is often required in the medical field. Our workshop therefore used a PU ABS UL94-V0 material, 8260 from Heicast. The parts had several needs. These sometimes required screw threads. In addition, some of the holes had to be produced with brass inserts. The paint used to obtain RAL 9016 had to comply with the European ROHS standard (Restriction of Hazardous Substances). The project involved many parts with large sizes.It was necessary for the parts to be delivered to the customer fully assembled. During our exchanges, the customer added to its request the 3D file of a steel strip inserted into one of the parts already present in the file. Project implementation After reading the specification, our workshop selected vacuum casting for the plastics parts of this project. We produced it from PU ABS UL94-V0 by silicone molding. It decided to produce the metal part from aluminum. This part was the only one produced by CNC machining. A paint finish RAL 9016 was applied to most of the non-transparent plastic parts. The transparent parts were prototyped by PU PC vacuum casting with a polished-mirror finish. They were assembled by gluing with an adhesive for permanent fixing. Finally, we created the strip by machining of stainless steel. Final product We assembled and delivered the 3D prototypes to the customer. The customer complimented us on the high quality of the prototypes. In fact, they were functional and the finishes completely satisfied the customer.