Accura 60 (Plastic / Photopolymer)

Get quotes for parts in Accura 60
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

3D Systems

Description

Simulate the properties and appearences of polycarbonate with this clear, tough plastic. Applications: functional prototypes; automotive design components; consumer electronics (cell phones etc.); medical instruments, devices and labware; lighting components (lenses etc.); fluid flow and visualisation models; master patterns for urethane castings; QuickCast patterns for investment casting; transparent assemblies; clear display models. Achieve the look and feel of polycarbonate.

State of starting material

liquid

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Tooling

As master pattern for casting applications

patterns for urethane casting, pattern for investment casting, for QuickCast applications


Register for free or Log in
for more information

Process

Manufacturing process

Stereolithography
Parts are built from a liquid photopolymer in a vat which is selectively cured by light-activated polymerization. Synonyms: SLA

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.21 g/cm3

Mechanical Properties

ultimate tensile strenght: 58 - 68 MPa
tensile modulus (Young's / E- ): 2,690 - 3,100 MPa
flexural modulus: 2,700 - 3,000 MPa
flexural strenght: 87 - 101 MPa


Register for free or Log in
for more information

Data source: 3D Systems

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.