Accura Bluestone (Plastic / Photopolymer)

Get quotes for parts in Accura Bluestone
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

3D Systems

Description

With thermal treatment
Applied where heat-generation from electrical components may be a factor; covers and enclosures of electrical and mechanical components; electronic applications, such as insulating components, connectors, adaptor fittings, bases, sockets, and areas where ceramics might be used. High humidity resistance. resists temperatures up to 250 °C; injection mould tooling.

State of starting material

liquid

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

As master pattern for casting applications

pattern for investment casting, pattern for vacuum casting


Register for free or Log in
for more information

Process

Manufacturing process

Stereolithography
Parts are built from a liquid photopolymer in a vat which is selectively cured by light-activated polymerization. Synonyms: SLA

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.78 g/cm3

Mechanical Properties

ultimate tensile strenght: 66 - 68 MPa
tensile modulus (Young's / E- ): 7,600 - 11,700 MPa
flexural modulus: 8,300 - 9,800 MPa
flexural strenght: 124 - 154 MPa


Register for free or Log in
for more information

Data source: 3D Systems

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.