DuraForm FR 100 (Plastic / PA with flame retardant)

Get quotes for parts in DuraForm FR 100
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

3D Systems

Description

Halogen- and antimony free flame retardant plastic; reduced smoke toxicity. FAR 25.853 (non-drip). UL94 V-0 rating / IEN/DIN EN 60 695-11-10 and EN/DIN EN 60 695-11-20. Applications: Aerospace and aircraft cabin, compartment and cargo; computers; electrical appliances; complex, thin-walled ductwork. Offers toughness of injection molded plastics.

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Flame retardant plastic

flame retardant acc. to UL 94


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.07 g/cm3

Mechanical Properties

ultimate tensile strenght: 32 MPa
yield stress Rp 0.2%: 27 MPa
tensile modulus (Young's / E- ): 1,880 MPa
flexural modulus: 1,462 MPa


Register for free or Log in
for more information

Data source: 3D Systems

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.