RWT-FBK 200 (Plastic / Photopolymer)

Get quotes for parts in RWT-FBK 200
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application



3D Systems


State of starting material


Properties, applications and appearance

Field of application

Rapid Prototyping

Register for free or Log in
for more information


Manufacturing process

Photopolymer Jetting
Parts are built by photopolymers which are jetted using inkjet print-heads and then light cured. Synonyms: Polyjet modeling, Polyjetting, Multijetting, Jetted Photopolymer

Physical, mechanical and thermal properties

Mechanical Properties

ultimate tensile strenght: 28 MPa
tensile modulus (Young's / E- ): 1,200 MPa
flexural modulus: 1,550 MPa
flexural strenght: 43 MPa

Thermal Properties

glass transition temperature: 33 °C
heat deflection temperature (at 0.45 Mpa): 48 °C

Register for free or Log in
for more information

Data source: 3D Systems

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.