Visijet Techplast (Plastic / Photopolymer)

Get quotes for parts in Visijet Techplast
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

3D Systems

Description

models and prototypes, functional testing, master patterns for moldmaking, direct investment casting. UV curable plastic.

State of starting material

liquid

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing, Rapid Tooling

As master pattern for casting applications

pattern for investment casting


Register for free or Log in
for more information

Process

Manufacturing process

Photopolymer Jetting
Parts are built by photopolymers which are jetted using inkjet print-heads and then light cured. Synonyms: Polyjet modeling, Polyjetting, Multijetting, Jetted Photopolymer

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.02 g/cm3

Mechanical Properties

ultimate tensile strenght: 22.1 MPa
tensile modulus (Young's / E- ): 866 MPa
flexural strenght: 28.1 MPa
elongation at break: 6.1 %


Register for free or Log in
for more information

Data source: 3D Systems

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.