Alumide (Plastic / PA aluminium filled)

Get quotes for parts in Alumide
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

aluminium-filled polyamide 12
Good machinability, simplified through the cut breaking effect of aluminium filling. Post-processing: griding, polishing, coating. For stiff parts of metallic appearance for applications in automative manufacture, for tool inserts for injection and moulding small production runs, for illustrative models, for education an jig manufacture etc.

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing, Rapid Tooling

Production of tooling inserts

tool insert for injection moulding, tool insert for die-casting


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.36 g/cm3

Mechanical Properties

ultimate tensile strenght: 48 MPa
tensile modulus (Young's / E- ): 3,800 MPa
flexural modulus: 3,600 MPa
flexural strenght: 72 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.