PA 1102 black (Plastic / PA 11)

Get quotes for parts in PA 1102 black
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

Polyamide 11
Made out of renewable raw materials (castor oil). Good resistance to chemicals, especially hydrocarbons, aldehydes, ketones, mineral bases and salts, alcohols fuels, detergents, oils and fats. Cytotoxicity according to DIN EN ISO 10993-5. UV-stable. Applications: Mechanically loaded functional prototyps and series parts with long-term moving elements (e.g. hinges); interior components for crash relevant parts (PA 1101 components do not splinter); thin walls and lattice structures. Due to mass-coloring well suited for abrasively stressed and manually manipulated visible parts.

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Chemical resistant

res. to organic solutions, solvent resistant, oil resistant, alcohol resistant, ketone resistant, hydrocarbone resistant, fuel resistant, aldehyde resistant, mineral bases resistant, salts resistant, detergents resistant


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 0.99 g/cm3

Mechanical Properties

ultimate tensile strenght: 48 MPa
ultimate tensile strenght (z): 48 MPa
tensile modulus (Young's / E- ): 1,560 MPa
tensile modulus (Young's / E- ) (z): 1,610 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.