PA 2210 FR (Plastic / PA with flame retardant)

Get quotes for parts in PA 2210 FR
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

Polyamide 12 with flame retardant
Halogen free, chemical flame retardant. In case of fire a carbonating coating arises on the surface of the part, isolating the plastic below. JAR 25 (aviation), UL 94 (electrical & electronics). For aviaton (e.g. air ducts), plastic parts in devices and appliances (e.g. E&E housings).

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Flame retardant plastic

flame retardant acc. to JAR 25, flame retardant acc. to UL 94


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.06 g/cm3

Mechanical Properties

ultimate tensile strenght: 46 MPa
ultimate tensile strenght (z): 41 MPa
tensile modulus (Young's / E- ): 2,500 MPa
tensile modulus (Young's / E- ) (z): 2,300 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.