PA 2221 - PrimePart PLUS (Plastic / PA 12)

Get quotes for parts in PA 2221 - PrimePart PLUS
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

Polyamide 12 with halogen-based flame retardant
Biocompatibile according to ISO 10993-1. USP biological test classification VI. Single components comply with FDA, 21 CFR, ยง177.1500 (b) 9 excluding contact with alcohol-containing food and beverages. An additional infiltration with epoxy resin is recommended for vacuum casting.

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Bio compatible


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 0.97 g/cm3

Mechanical Properties

ultimate tensile strenght: 47 MPa
ultimate tensile strenght (z): 40 MPa
tensile modulus (Young's / E- ): 1,650 MPa
tensile modulus (Young's / E- ) (z): 1,600 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.