PA 3200 GF (Plastic / PA glass filled)

Get quotes for parts in PA 3200 GF
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application





Polyamide 12 glass bead filled
Whitish, glass-filled polyamide 12 powder; excellent stiffness in combination with good elongation at break; mechanical wear-resistance; thermal loadability; constant long-term behaviour. For final parts within the engine area of cars, for deep drawing dies. High heat distortion temperature.

State of starting material


Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Tooling

Register for free or Log in
for more information

Reviews (1)

PA 3200 GF (EOS) has a total score of 5 based on 1 reviews.
Written by: University
Oct 26, 2015
Parts value
100-250 €
Part produced
Functional prototype
Great and fast. White polymer is very stable and precision is 0.2 mm.


Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.22 g/cm3

Mechanical Properties

ultimate tensile strenght: 51 MPa
ultimate tensile strenght (z): 47 MPa
tensile modulus (Young's / E- ): 3,200 MPa
tensile modulus (Young's / E- ) (z): 2,500 MPa

Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.