Stainless Steel PH1 (Metal / Edelstahl / stainless steel)

Get quotes for parts in Stainless Steel PH1
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application





Stainless steel
Applied for functional parts, direct parts, small series, individualised products, spare parts. Applied in medical, aerospacial industry and others. Almost no anisotropic material properties.


UNS S15500, DIN 1.4540

State of starting material


Properties, applications and appearance

Field of application

Rapid Manufacturing

Corrosion resistant

Register for free or Log in
for more information


Manufacturing process

Laser Melting
Parts are built in a metal powder bed through a laser (or lasers) melting the metal powder layer-by-layer. Synonyms: Selective Laser Melting, SLM, Direct Metal Laser Sintering, DMLS, Laser Cusing

Physical, mechanical and thermal properties

Physical Properties

typical accuracy: 20 - 50 µm
typical accuracy: 0 +/-0.2 %
smallest wall thickness: 0.3 - 0.4 mm
surface roughness Ra: 2.5 - 4.5 µm

Mechanical Properties

ultimate tensile strenght: 1,150 +/-50 MPa
ultimate tensile strenght (y): 1,150 +/-50 MPa
ultimate tensile strenght (z): 1,050 +/-50 MPa
yield stress Rp 0.2%: 1,050 +/-50 MPa

Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.