Ti64 (Metal / Titan / titanium)

Get quotes for parts in Ti64
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application





Titanium alloy with heat treatment
Applied in aerospacial, racing and medical applications.Consider requirements for validation and regulations (medical products)!


ISO 5832-3, ASTM F1472, ASTM B348

State of starting material


Properties, applications and appearance

Field of application

Rapid Manufacturing

Corrosion resistant

Register for free or Log in
for more information


Manufacturing process

Laser Melting
Parts are built in a metal powder bed through a laser (or lasers) melting the metal powder layer-by-layer. Synonyms: Selective Laser Melting, SLM, Direct Metal Laser Sintering, DMLS, Laser Cusing

Physical, mechanical and thermal properties

Physical Properties

typical accuracy: 0 +/-50 µm
smallest wall thickness: 0.3 - 0.4 mm
surface roughness Ra: 9 - 12 µm
surface roughness Ra: 6 - 10 µm

Mechanical Properties

ultimate tensile strenght: 1,050 +/-20 MPa
ultimate tensile strenght (z): 1,060 +/-20 MPa
yield stress Rp 0.2%: 1,000 +/-20 MPa
yield stress Rp 0.2% (z): 1,000 +/-20 MPa

Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.