Titanium Ti64ELI (Metal / Titan / titanium)

Get quotes for parts in Titanium Ti64ELI
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application





Titanium alloy
Light alloy characterized by having excellent mechanical properties and corrosion resistance combined with low specific weight and biocompatibility. Ideal for the production of biomedical implants (note: subject to fulfilment of statutory validation requirements where appropriate).


, ASTM F136

State of starting material


Properties, applications and appearance

Field of application

Rapid Manufacturing

Corrosion resistant

Register for free or Log in
for more information


Manufacturing process

Laser Melting
Parts are built in a metal powder bed through a laser (or lasers) melting the metal powder layer-by-layer. Synonyms: Selective Laser Melting, SLM, Direct Metal Laser Sintering, DMLS, Laser Cusing

Physical, mechanical and thermal properties

Physical Properties

typical accuracy: 0 +/-50 µm
smallest wall thickness: 0.3 - 0.4 mm
surface roughness Ra: 3 - 20 µm
surface roughness Ra: 4 - 9 µm

Mechanical Properties

ultimate tensile strenght: 1,260 +/-40 MPa
ultimate tensile strenght (z): 1,250 +/-50 MPa
yield stress Rp 0.2%: 1,125 +/-65 MPa
yield stress Rp 0.2% (z): 1,130 +/-75 MPa

Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.