Inconel 718 (Metal / Nickel-based alloys)

Get quotes for parts in Inconel 718
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

SLM Solutions

Description

Nickel alloy
High mechanical stability up to 700°C and good weldability. Resistant to crack formation along welding seams. Applied for aerospace and energy technologies (turbine parts) and toolmaking.

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Manufacturing, Rapid Tooling

Corrosion resistant


Register for free or Log in
for more information

Process

Manufacturing process

Laser Melting
Parts are built in a metal powder bed through a laser (or lasers) melting the metal powder layer-by-layer. Synonyms: Selective Laser Melting, SLM, Direct Metal Laser Sintering, DMLS, Laser Cusing

Physical, mechanical and thermal properties

Physical Properties

surface roughness Ra: 6 +/-2 µm
surface roughness Rz: 34 +/-10 µm

Mechanical Properties

ultimate tensile strenght: 995 +/-43 MPa
yield stress Rp 0.2%: 689 +/-67 MPa
tensile modulus (Young's / E- ): 173,000 +/-17,000 MPa
elongation at break: 29 +/-4 %


Register for free or Log in
for more information

Data source: SLM Solutions

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.