FullCure 720 (Plastic / Photopolymer)

Get quotes for parts in FullCure 720
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application





Epoxy resin
Material simulating standard plastics

State of starting material


Properties, applications and appearance

Field of application

Rapid Prototyping


Register for free or Log in
for more information


Manufacturing process

Photopolymer Jetting
Parts are built by photopolymers which are jetted using inkjet print-heads and then light cured. Synonyms: Polyjet modeling, Polyjetting, Multijetting, Jetted Photopolymer

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.18 - 1.19 g/cm3

Mechanical Properties

ultimate tensile strenght: 50 - 65 MPa
tensile modulus (Young's / E- ): 2,000 - 3,000 MPa
flexural modulus: 2,700 - 3,300 MPa
flexural strenght: 80 - 110 MPa

Register for free or Log in
for more information

Data source: Stratasys

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.