Objet High Temperature Material (Plastic / Photopolymer)

Get quotes for parts in Objet High Temperature Material
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

Stratasys

Description

Epoxy resin, RGD524
Material simulating engineering plastics.

State of starting material

liquid

Properties, applications and appearance

Field of application

Rapid Prototyping


Register for free or Log in
for more information

Process

Manufacturing process

Photopolymer Jetting
Parts are built by photopolymers which are jetted using inkjet print-heads and then light cured. Synonyms: Polyjet modeling, Polyjetting, Multijetting, Jetted Photopolymer

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.17 - 1.18 g/cm3

Mechanical Properties

ultimate tensile strenght: 70 - 80 MPa
tensile modulus (Young's / E- ): 3,200 - 3,500 MPa
flexural modulus: 3,100 - 3,500 MPa
flexural strenght: 110 - 130 MPa


Register for free or Log in
for more information

Data source: Stratasys

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.