VeroGlaze (Plastic / Photopolymer)

Get quotes for parts in VeroGlaze
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

Stratasys

Description

MED620
Materials for dentistry and orthodontics. Opaque white material with A2 shading designed to provide the best color match in the industry. Medically approved for temporary in-mouth placement, up to 24hours. Bio-compatibility approved. Ideal for: Veneer models; diagnostic wax-ups.

State of starting material

liquid

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Bio compatible


Register for free or Log in
for more information

Process

Manufacturing process

Photopolymer Jetting
Parts are built by photopolymers which are jetted using inkjet print-heads and then light cured. Synonyms: Polyjet modeling, Polyjetting, Multijetting, Jetted Photopolymer

Physical, mechanical and thermal properties

Physical Properties

specific density: 1.17 - 1.18 g/cm3

Mechanical Properties

ultimate tensile strenght: 55 - 65 MPa
tensile modulus (Young's / E- ): 2,300 - 3,300 MPa
flexural modulus: 2,300 - 3,200 MPa
flexural strenght: 80 - 100 MPa


Register for free or Log in
for more information

Data source: Stratasys

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.