BSF Bünter AG

BSF Bünter AG

Short description

Limitless possibilities thanks to Additive Manufacturing in combination with mechanical post processing!

Posts (9)

BSF Bünter AG September 3, 2021

Automation in seconds - optimized feedrail

An automation system has to move 20 different products very quickly from a conveyor bowl to the assembly line. A hard job for the engineers, but a perfect job for SLM!

AM Expo 2021

BSF Bünter AG November 13, 2019

Highly dynamic vacuum gripper used in clean room

With clever design, Samaplast reduces downtime by 50%. The new vacuum gripper increases productivity significantly, because it weighs only just the half. The design freedom of additive manufacturing of metal provides everything that is needed besides the good idea of an engineer.

AM Expo 2020

BSF Bünter AG November 19, 2018

Additive Manufacturing in use at 400m depth

With increasing depth, large forces act on the tubes of a geothermal probe. In order to be able to cope with these forces at the lowest point over decades, Jansen relies on additive reinforcing sleeves and saves 70% of the original production costs.

AM Expo 2020

BSF Bünter AG June 26, 2018

Design for AM - Lightweight with structures

Parts with a lower weight lead to lower prices. But without routine and professional software tools, design optimization is a really time-consuming process. The key is outsourcing! Just choose one of our standard structure and profit!

AM Expo 2019

BSF Bünter AG April 4, 2018

Thin-walled cover for microforce sensor for nano-newtons

The component combines the strengths of additive manufacturing with the traditional post processing. Thin wall thickness, freedom of design, precise guides, highest surface quality and a marketable price in quantities of 500-1000 pcs/year.

AM Expo 2019

BSF Bünter AG March 12, 2018

OptiCool - Automated design of conformal cooling channels

During a KTI-project, BSF Bünter AG has developped an innovative software tool, that automatically generates conformal cooling channels within a very short time (-90%). Flow and heat conduction are constantly simulated and the channels get optimized for the best possible results.

AM Expo 2020

BSF Bünter AG January 11, 2017

Conformal Cooling: Design & Production

BSF Bünter AG desings clever cooling systems for your mold inserts, paying attention to optimal heat transfer, flow conditions and the production restrictions of Additive Manufacturing. Benefit from our know-how for the best possible results in injection molding!

AM Expo 2020

BSF Bünter AG December 13, 2016

Plastic injection mold with optimal conformal cooling system

Conformal cooling systems in plastic injection molds lead to a higher quality of the plastic product in a shorter cycle time. This results in a higher quality product at lower cost.

AM Expo 2020

BSF Bünter AG March 21, 2016

Improved bayonet mount

The new design of the bayonet mount enables an easy mounting combined with very small size. The part can only be produced additively.

AM Expo 2019

Standards, Products, Services

  • S Product development
  • S Engineering services
  • S Topology optimization
  • S Design of parts for additive manufacturing
  • S Prototyping
  • S Measuring, 3D scanning
  • S Consulting
  • S Consulting additive manufacturing
  • S Workshops
  • S Further services for manufacturers
  • S Milling, turning, grinding
  • S Laser processing
  • S Erosion
  • S Additive manufacturing metals
  • S Further post-processing, surfaces
  • S Printing, marking
  • S Assembly

About us