Zurich University of Applied Science - Institute of Product Development and Production Technologies

Zurich University of Applied Science - Institute of Product Development and Production Technologies

Short description

Innovation management in you production chain, product development, 3D experience, CAx-Technologies, Additive Manufacturing (PBF-LB, etc.), continuing education in additive manufacturing this is some of the things we do with passion.

Posts (10)

Zurich University of Applied Science - Institute of Product Development and Production Technologies January 4, 2024
Know-How

Learning to make the most of additive manufacturing

"3D printing" or "additive manufacturing" opens up new possibilities. Their use requires knowledge, training and synthesis with personal experience in order to get the most out of these potentials, both economically and ecologically. The ZHAW supports you in achieving the very best.

Zurich University of Applied Science - Institute of Product Development and Production Technologies May 8, 2023
Know-How

Continuing education in additive manufacturing

Education and training in additive manufacturing is our contribution to increase the efficiency in the use of this constantly growing manufacturing technology. Sustainability, acceleration and cost reduction are possible, if the training matches.

Zurich University of Applied Science - Institute of Product Development and Production Technologies May 8, 2023
Showcase

Additive value in product and production development

Enhancement of products and production is our focus in Additive and Subtractive Manufacturing. This video shows our typical equipment for Additive Manufacturing Quality enhancement.

Zurich University of Applied Science - Institute of Product Development and Production Technologies February 2, 2022
Showcase

Porous titanium structures for patient specific implants

Porous structures with tailored structural stiffness can improve the load transfer from implant to bone and therefore, have great potential in orthopaedics and traumatology.

Zurich University of Applied Science - Institute of Product Development and Production Technologies October 6, 2021
Showcase

Parametric structures in jewellery design

Aesthetic implementation of parametric structures in jewelry design using additive manufacturing - A symbiosis of aesthetics, technology and science.

Zurich University of Applied Science - Institute of Product Development and Production Technologies May 14, 2021
Video

«Added Value by Additive Manufacturing»

ZPP, your competent partner in additive manufacturing. From economic & technical feasibility studies, customized product development, topology optimization and simulation, process and parameter development for various metal alloys to general and customer-specific education and training on the topic.

Zurich University of Applied Science - Institute of Product Development and Production Technologies May 11, 2021
Showcase

Planet carriers optimised through additive manufacturing

In this R&D project at ZPP/ZHAW, a planet carrier for a planetary gearbox was optimized by additive manufacturing. An example that excellently demonstrates the "added value" of AM (L-PBF). With the result of reducing components, assembly time, inertia forces and weight.

Zurich University of Applied Science - Institute of Product Development and Production Technologies February 18, 2021
Video

Laser Powder Bed Fusion of 30CrNiMo8 Steel

Lecture by Livia Zumofen at the "virtual" Fraunhofer Direct Digital Manufacturing Conference DDMC 2020 - Laser Powder Bed Fusion of 30CrNiMo8 Steel for Quenching and Tempering – Examination of the Processability and Mechanical Properties.

Zurich University of Applied Science - Institute of Product Development and Production Technologies July 23, 2018
Showcase

3D printer for technical ceramics

3D ceramic printer based on microextrusion with subsequent sintering. The prototype of a 3D ceramic printer 2.0 was developed at the ZHAW in an interdisciplinary development project.

Zurich University of Applied Science - Institute of Product Development and Production Technologies April 22, 2016
Showcase

Hybrid tool optimises injection molding

Injection mold with internal conformal cooling additively placed by selective laser melting on the tool base. Reduction of cycle time by 60%.

AM Expo 2016

Standards, Products, Services

  • P CAD software
  • P CAD plugins
  • P FEM and simulation software
  • P 3D Scanners
  • P Surface testing
  • P Further measuring devices, scanners, quality control
  • P publications
  • P 3D Scan Software
  • P PLM software
  • P Milling machines
  • P Turning machines
  • P Deep drilling machine
  • P Laser processing
  • P Further equipment metal processing
  • P Powder bed processes metal and ceramic (SLM, EBM, etc.)
  • P Material extrusion (FDM, FFF, etc.)
  • P Photo Polymerisation (SLA, PJ, Clip, etc.)
  • P Direct Metal Deposition (LMD, powder jet processes, etc.)
  • P Components for equipment additive manufacturing
  • P Surface treatment
  • P Surface cleaning
  • P Further post-processing, surface treatment
  • P Plastics additive manufacturing
  • P Metals additive manufacturing
  • P Ceramics additive manufacturing
  • P Further materials additive manufacturing
  • P Milling tools
  • P Drilling tools
  • P Turning tools
  • P Clamping Technology
  • P Further tools, products for subtractive manufacturing
  • P Assembly and handling technology
  • P Positioning system
  • P Sensor systems
  • P CAD / CAM systems
  • P Simulation software
  • S 3D Scanning
  • S Further services development
  • S Product development
  • S Engineering services
  • S Topology optimization
  • S Engineering of tools with conformal cooling
  • S Design of parts for additive manufacturing
  • S Reverse engineering
  • S Simulation (FEM, process simulation, etc.)
  • S Injection molding tools
  • S Tools with conformal cooling
  • S Tools for fiber-reinforced plastics
  • S Production of parts and assemblies
  • S Prototyping
  • S Small series
  • S Measuring, 3D scanning
  • S Technology development
  • S Material development
  • S Application development
  • S Consulting
  • S Consulting additive manufacturing
  • S Workshops
  • S Production of custom machines
  • S Patents & IP
  • S Contract research and development
  • S Further research and development
  • S Further services
  • S Training
  • S Milling, turning, grinding
  • S Additive manufacturing plastics
  • S Additive manufacturing metals
  • S Surface treatment
  • S Surface testing
  • S Education
  • S CAD, MAS, courses with certificates and diplomas
  • S Further education and training

About us

The Institute of Product Development and Production Technologies (IPP) at the ZHAW is specialised to innovative your product development in mechanical engineering, from the idea to the real series product, and conducts research in all areas of the innovation process.

Take advantage of our competencies and modern infrastructure in three main areas for your development project
- Additive Manufacturing

- 3D Experience and

- Circular Product Design

Additive Manufacturing:
- Adapted product development for enhanced Additive Manufacturing Process Chains
- Economic and technical studies
- Topology optimisation and simulation
- Process and machine development for additive manufacturing
- aF&E projects for product and process development in additive manufacturing
- Support in the form of workshops and training for the introduction of additive manufacturing
- General and customer-specific education and training on additive manufacturing