Posts

Discover products, solutions and applications of the providers.

All posts

Rapid Manufacturing AG October 25, 2022
Product Highlight

FS 3200 PA-F - a unique polyamide

As a former beta tester, we are the only service bureau in the world to use Farsoon's special material! There is not only the "ONE" polyamide - polyamides is a collective term for various thermoplastics.

Rapid Manufacturing AG October 25, 2022
Showcase

Drone parts for Wingtra Ltd.

The mapping drone of Wingtra – airplane and VTOL (vertical take-off and landing) Additive manufacturing parts suitable for air transportation – by Rapid Manufacturing

AMPA October 3, 2022
News

Call for Papers - AMPA23

We would like to announce the Call for Paper for AMPA2023, which is organized by ETH Zurich and will be held in Lucerne, Switzerland, September 12-14, 2023. We kindly invite you to submit an abstract by November 11, 2022.

ZHAW Zürcher Hochschule für Angewandte Wissenschaften, ZPP Zentrum für Produkt- und Prozessentwicklung February 2, 2022
Showcase

Porous titanium structures for patient specific implants

Porous structures with tailored structural stiffness can improve the load transfer from implant to bone and therefore, have great potential in orthopaedics and traumatology.

Siemens Digital Industries Software November 22, 2021
Video

toolcraft AG uses NX to accelerate 3D metal printing process

Since 2017, toolcraft has been using Siemens NX solutions for additive manufacturing. Advanced techniques like powder bed fusion and multi-axis applications have lead to highly efficient and effective production levels.

ZHAW Zürcher Hochschule für Angewandte Wissenschaften, ZPP Zentrum für Produkt- und Prozessentwicklung October 6, 2021
Showcase

Parametric structures in jewellery design

Aesthetic implementation of parametric structures in jewelry design using additive manufacturing - A symbiosis of aesthetics, technology and science.

GF Casting Solutions AG September 28, 2021
Story

GF Additive recertifies with excellence

GF Additive, also known as AMotion Center, renewed three of its most important certificates. The plant located in Novazzano obtained the recertifications without any further complaints or deviations from the quality guidelines.

AM Expo 2021

CENTREDOC September 16, 2021
Service Highlight

Where do you find out more after the fair?

On Additively.com, of course. Here you find access to the worldwide unique technology database for advanced manufacturing - 3DpaT of the Swiss Center for Data Analysis CENTREDOC.

IHI Bernex AG September 10, 2021
Product Highlight

Surface Protection of Complex Shaped Components

Is your 3-D printed component of metallic material and in need of surface protection? Be it against oxidation, wear or heat resistance, then Bernex is your partner.

AM Expo 2021

MiMtechnik GmbH September 9, 2021
Product Highlight

3D-Metal-Printer FL300M Powder Bound Filament Printing

Perfection in 3D metal printing technology: FL300M Powder Bound Filament Printing System developed by FuseLab in collaboration with JLOX-Metal-Filament. Our new extruder technology delivers high performance 3D printing while maintaining the highest reliability standards.

pd|z Product Development Group Zurich September 9, 2021
Showcase

Innovative Highly Functional Integrated AM Brake Caliper

A monolithic additive manufactured (AM) mechanism with threefold integration of functionalities: fluid channels, compliant thin corrugated membrane and lightweight design that demonstrates the free "functional complexity" potential of metallic AM

spherene AG September 7, 2021
Service Highlight

Cost reduction from design to production

The new design process method offers several advantages even during production. Which makes shorter design intervals, lower print height, free part orientation, and much more.

AM Expo 2021

spherene AG September 7, 2021
Showcase

Novel Design Method

This novel technology allows for the users to apply numerous boundary conditions and realize the best optimal solution with the Adaptive Minimal Density Surface (ADMS) methology.

AM Expo 2021

spherene AG September 7, 2021
Product Highlight

Support-free Print Horizon

The algorithm makes it possible to realize parts which can be printed with highly reduced or even without support structures. Already reducing the costs in the virtual environment at the design level.

AM Expo 2021

BSF Bünter AG September 3, 2021
Showcase

Automation in seconds - optimized feedrail

An automation system has to move 20 different products very quickly from a conveyor bowl to the assembly line. A hard job for the engineers, but a perfect job for SLM!

AM Expo 2021

Advisors4am GmbH & NUFORM September 2, 2021
Service Highlight

Bundled expertise for superior AM solutions

We have made it our mission to accompany our customers through all process steps from the clarification of requirements to the ready-to-install component, thus enabling a risk-free and rapid entry into the world of additive manufacturing.

AM Expo 2021

TRUMPF Schweiz AG September 1, 2021
Service Highlight

Consultation on additive manufacturing

Do you have a component that you would like to manufacture additively? Would you like to know the savings potential and other benefits that come with additive manufacturing? Our additive manufacturing experts would be happy to advise you and prepare you for a successful start with our technology.

DIM3NSIONS GmbH September 1, 2021
Showcase

Printed serial parts at Rufalex

Rufalex Rolladen-Systeme AG in Kirchberg BE does not only print prototypes and jigs and fixtures with their Ultimaker 3D printers but also serial parts for their production in Switzerland. This allows the company to stay flexible and able to supply in times of uncertain logistics and supply chains.

AM Expo 2021

TRUMPF Schweiz AG August 30, 2021
Product Highlight

Increased Productivity with Multiplate & Multilaser

Benefit from a longer machine runtime with the Multiplate option. With the Multilaser option, you also enjoy a productivity increase of up to 80 % and maximum flexibility for customer orders.

AM Expo 2021

TRUMPF Schweiz AG August 30, 2021
Product Highlight

Additive manufacturing with preheating up to 500 °C

With features like optional 500 °C preheating and the full-field multilaser equipment with three 500 watt TRUMPF fiber lasers, you are fully equipped for the most demanding industrial applications.

TRUMPF Schweiz AG August 30, 2021
Showcase

Additively manufactured dental products

The Multiplate option can reduce the production time for dental indications. For example, the TruPrint 1000 can be used for continuous production at night or on weekends.

AM Expo 2021

TRUMPF Schweiz AG August 26, 2021
Service Highlight

Additive pilot production under ISO 13485 for MedTech

Take advantage of the specialized know-how from the Swiss m4m Center and the most innovative additive manufacturing technology from TRUMPF to develop your medical products.

AM Expo 2021

Advisors4am GmbH & NUFORM August 24, 2021
Showcase

Experience sport in a new way with additive manufacturing

ASB GlassFloor stands for innovation in the world of sports. With the help of additive manufacturing, the company produces the most modern flooring system on the market. Like a chameleon, the floor adapts its illuminated pitch markings to the respective sport.

AM Expo 2021

Advisors4am GmbH & NUFORM August 24, 2021
Product Highlight

Precision drive of a prototype plant

The assembly serves as the mechanical heart for driving a prototype system for the additive manufacturing of wear-resistant carbide materials with the special requirement of a micrometre-precise centric drive.

AM Expo 2021