Customized mass production, functional design, enhanced energy and resource efficiency as well as shorter innovation cycles: these advantages of additive manufacturing are increasingly utilized in equipment manufacturing.
26. August 2020
UNA wheel, a start-up from Moscow, invented a unique electric motor, giving wheelchair users extra mobility. The electric motor is attached to a wheelchair with a load-bearing fixture which needs to be extremely stable and lightweight simultaneously. A perfect task for the Composer A4 by Anisoprint.
29. July 2020
The noonee chairless chair relieves worker, supports a healthy working position and makes the worker more efficient. During the product development, Rapid Manufacturing Ltd. played an intensive role by supporting noonee sometimes even with express production of prototypes.
12. February 2020
In an extended study, the Institute for Materials Engineering and Plastics Processing at the University of Applied Sciences in Rapperswil used various tests to investigate how the surface of additively manufactured components can be improved using SURFAST.
6. February 2020
There are many good reasons why elastic materials are used: to achieve a specific function, a special feel or an unusual appearance to name just a few – 3D printing helps in a fast and precise way to manufacture components made of silicone and rubber.
Access to high quality and functional prototypes made of plastic or elastomers has never been easier and faster than with the 3D Systems MJP EasyClean System. In addition, this 3D printer excels with 3D printing speeds up to three times faster than printers of the same class.
26. June 2018
A check valve permits a fluid to flow in one direction only. This application was selected for the Swiss AM Guide 18, as it demonstrates how an iterative development process and the consideration of trade-offs result in a successful AM serial part.
4. April 2018
The component combines the strengths of additive manufacturing with the traditional post processing. Thin wall thickness, freedom of design, precise guides, highest surface quality and a marketable price in quantities of 500-1000 pcs/year.
20. February 2018
The increasing need for innovation demands agile product development. We demonstrate how AM decreases turn-around time for injection molded prototypes from several weeks to a few days. As a demonstration, a plug housing is injection molded in 24 hours using the production material (PBT Valox 325).
15. February 2018
New development of a vacuum cleaner nozzle, which could already be thoroughly testet and optimised during the prototype phase. A distinct benefit of 3D-Printing: Short time-to-market provides competitive advantages.
7. February 2018
The process setup (build orientation optimization and support structure design) for a pre-existing part is of large practical importance, e.g., in the service and reconditioning market. It is demonstrated here for a pump impeller.
2. March 2016
Load-bearing structure for a exoskeleton
Retailer for 3D printers, scanners, materials, etc. Exclusive partner for 3ntr 3D printers (FDM) , partner for Anisoprint (Composer with Continuous Carbon Fiber), partner for Formlabs (SLA).
layer by layer to your part; selective laser sintering of small batch series and prototypes.
from Rümlang ZH,
SURFAST® , the unique technology for surface machining, developped by Jet Clean Systems Ltd.
Official Swiss representative of 3D printers from 3D-Systems. Specialized in the field of additive manufacturing with printer technologies such as DMP, SLS, DLP, MJP and CJP, as well as authorized Distributor and General Representative of Machine Tools by TTGroup & Indùstrias ROMI S.A..
The Swiss AM Guide presents innovative ideas and possibilities in the field of additive manufacturing based on real-world application examples. The Swiss AM Guide a publication of the AM Network Switzerland and pd|z of ETH Zurich.
Limitless possibilities thanks to Additive Manufacturing in combination with mechanical post processing!
Injex offers an injection molding service which is based on additive tooling. This reduces lead times for injection molded prototypes and small series from several weeks to a few days.
Service provider in the field of additive manufacturing metal since 2006
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.