3D printing embraces a wide spectrum of very diverse manufacturing methods that are developing at a rapid pace. What was inconceivable just a few years ago is now standard practice. This topic shows you all you need to know about new technologies and the options they have to offer.
17. June 2021
The AM-System Wizard 480+ enables you to manufacture with CFF (Continuous Filament Fabrication) and FFF (Fused Filament Fabrication) as well as their combination for components of 400x300x400 mm. The device offers 4 changing stations, an open, flexible material system and water-cooled print heads.
9. December 2020
LIGHTWAY offers in-house expertise in design, advanced additive manufacturing techniques, 3D metal printing, robotic CNC machining and final finishing with emphasis on quality and efficiency throughout the entire production process. Learn how LIGHTWAY increased productivity with Siemens NX.
16. September 2020
For the first time, extremely strong and at the same time very light-weight components can be printed using a combination of CFF and FFF 3D printing. New types of high-precision 3D printing systems in combination with real continuous carbon fiber open up new dimensions.
8. September 2020
25. June 2020
alcento is a premium ornamental light for both home and office use. Part of the design are three cable clamps for fixation. They have to be black, good quality and should be produced in Switzerland in a small batch serie. The requirements were matched with the new additive SLS FLIGHT technology.
Every month we publish the latest publications with innovations on the topic of advanced manufacturing in all important industries worldwide. Benefit from this professional technology monitoring.
26. March 2020
Are you looking for the right 3D printing solution for your project or specific AM materials? Are you considering investing in the development of 3D know-how? We offer training and advise you so that you can benefit from the fascinating 3D printing technology.
25. March 2020
The example from the 3D Chromos practice shows that anyone who now integrates the possibilities of additive manufacturing (AM) technology, thinks further and obtains information can not only cushion worst-case scenarios in the production chain, but also benefit from technological optimizations.
11. February 2020
Swiss premiere: SATURN printer by ATMAT. An impressive build volume of 1200 x 1000 x 1000 mm allows the print of big parts. Thanks to the heated build chamber and the dual printhead, complexity, and performance reach a new level of performance. Come and see the printer at our booth.
4. February 2020
The SLM®280 Selective Laser Melting machine provides a 280 x 280 x 365 mm process chamber and patented multi-beam laser technology optimized for production.
2. April 2019
With the SURFAST® technology you can save time and money and achieve higher quality. The combination of high-quality abrasive with the appropriate fluid enables high-quality machining of components.
7. February 2019
Sinterit Lisa and Sinterit Lisa 2 Pro. Two professional 3D SLS desktop printers for printing complex, moving parts and multiple parts at once. Print your models as soon as you want. Lisa is ready to use.
Forming the next Dimension: We provide consulting, project planning, 3D printing, sales, installation, training, service around 3D printers and materials.
5. February 2019
Our training programme covers a host of seminars that communicate the quality-related aspects of am. The programme addresses all target groups, promoting across-the-board awareness of the special features of am covering a wide variety of company areas.
15. August 2018
In the additive production of metal parts, the right protective gas atmosphere is of great importance for the final quality of the printed 3D metal components in an optimal generative production process. Becker can provide a homogeneous protective gas atmosphere here.
9. July 2018
The TruPrint 1000 is a compact and robust 3D printing machine that uses Laser Metal Fusion technology to produce metallic 3D components of the highest quality quickly and easily.
Thanks to the combination of the particle foam EPP and the free design possibilities of 3D printing in toolmaking, an innovative lifestyle product with a new design was created from a conventional walking stick. This innovation was selected for the Swiss AM Guide 18.
6. July 2018
The TruPrint 3000 is a universal medium-format machine with industrial part and powder management, designed for flexible series production of complex, metal components using 3D printing. The large build volume also enables a high degree of partial flexibility.
We at Becker AG work in close cooperation with our customers. This means that we not only supply high-quality components, but also develop individually adapted solutions together with you with our know-how based on decades of experience.
4. July 2018
Becker AG develops critical components for 3D metal printing: Gas circulation blowers for homogeneous protective gas atmospheres, heat exchangers for constant installation space temperature and other. Learn more about how these components contribute to high-quality Metal 3D printed parts.
20. April 2018
German RepRap's new LAM technology enables 3D printing of silicone using materials from The Dow Chemical Company. With this technology, customized midsoles for shoes can be manufactured.
16. February 2018
The first national conference on additive manufacturing was held at Messe Lucerne.
Organised by AM-Network, SAMG of SWISSMEM, SATW and Swiss Engineering all relevant stakeholders in the SWISS additive manufacturing industry came together.
8. February 2018
Time and cost revolution in operational theatre: New 3D printsytem enables additive manufacturing of implants from high performance plastics (PEEK/TPE). GBN Systems supports KUMOVIS with the engineering and production of the printer.
AM Expo is the competent and most important meeting place for professional 3D printing. Here you will meet leading suppliers, service providers and experts in the field of additive manufacturing. Reserve the 14th and 13th September 2021 for the AM Expo.
Tuesday, 14. September 2021
- Wednesday, 15. September 2021
Additive manufacturing systems with CFF and FFF. High-strength components made of continuous carbon fier, integrated electronics with 3D printed metal wires. Multi-material components made of polymers, metal and composites (currently up to 4 material variants), and much more.
Siemens Digital Industries Software is driving transformation to enable a digital enterprise where engineering, manufacturing and electronics design meet tomorrow. The Xcelerator portfolio helps companies of all sizes create and leverage digital twins that provide organizations with new insights.
layer by layer to your part; selective laser sintering of small batch series and prototypes.
from Rümlang ZH,
Swiss Center for Data Search, Analysis and Synthesis
CHROMOS Group AG 3D Solutions is a sales partner and solution provider for 3D printers, 3D scanners and collaborative robots for the industry. As a solution provider we help companies to design and integrate system solutions in AM and Industry 4.0.
With our solutions, companies can quickly enter the third dimension. Our range includes 3D printers, from entry-level models to professional production printers, 3D scanners, 3D software, and printing services.
URMA is supplier of 3D-metal printing machines and CNC-Machinetools for metal machining. URMA is exclusive partner for Switzerland for SLM Solutions and Haas CNC-Machine tools. URMA is also a Swiss manufacturer of high-performance tools for precise hole making.
SURFAST® , the unique technology for surface machining, developped by Jet Clean Systems Ltd.
TÜV SÜD is a trusted partner of choice for safety,security and sustainability solutions.It specialises in testing,certification,auditing and advisory services.Through more than 24,000employees across over 1,000 locations,it adds value to its customers, inspiring trust in a physical and digital world
Becker AG is a worldwide leading manufacturer of vacuum pumps, compressors and systems. In additive manufacturing, we contribute critical components to machines: gas circulation blowers, heat exchangers, components for CO2 lasers and others.
KVT-Fastening is official distributor of German RepRap, Sintratec, Trumpf and Henkel. KVT-Fastening is able to offer the appropriate solution according to the customers’ needs – right in the spirit of our Solutioneering approach.
The Swiss AM Guide presents innovative ideas and possibilities in the field of additive manufacturing based on real-world application examples. The Swiss AM Guide a publication of the AM Network Switzerland and pd|z of ETH Zurich.
The National Thematic Network Innovation Booster Additive Manufacturing (NTN IBAM) - the Swiss innovation platform for additive manufacturing
"Turning your visions into products" - As your system supplier in Medical Technology, Additive Manufacturing, Semiconductor industries and Mechatronic devices we guide you from idea over engineering until serial manufactured product.
from Buch am Buchrain,
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.