"Rapid prototyping" refers to the various additive manufacturing methods used for rapid production of specimen components – in fact, this is where additive manufacturing originated. Rapid tooling is another technology that speeds up product manufacturing. It takes advantage of additive manufacturing techniques to produce tools. This topic shows how you can benefit from rapid manufacturing methods.
3. December 2020
In order for the e-bike company FLYER to grow further, the focus is on rapid product development. To support its own innovation process, FLYER chose the NXE400 SLA printer, which enabled it to reduce both design and production time by 48%.
4. November 2020
Since June 2018, our iron casting plant in Leipzig (DE) has had its own innovation center with a team working on additive manufacturing and its application for sand cores used in iron casting.
20. October 2020
Cooper Standard Automotive is one of the leading suppliers of plastic and rubber components for the automotive industry. By using EviXscan 3D scanners, Cooper Standard Automotive has increased efficiency and quality in various areas of production.
13. October 2020
The eviXscan 3D scanner and camera family includes high-quality 3D measuring devices for precise quality control, reverse engineering and prototyping.
29. July 2020
The noonee chairless chair relieves worker, supports a healthy working position and makes the worker more efficient. During the product development, Rapid Manufacturing Ltd. played an intensive role by supporting noonee sometimes even with express production of prototypes.
23. July 2020
If time is short we can make an express order. To do this, we reduce the height (volume to be produced) so that we reach the desired time window. Hard to believe, but in combination with express courier services, next-day deliveries of parts become possible.
25. June 2020
Industrial SLS system for less than € 70,000?
MfgPro230 xS has a large print volume and a high printing speed of up to 1 liter/h. Process high performance materials such as PA12.
6. February 2020
Access to high quality and functional prototypes made of plastic or elastomers has never been easier and faster than with the 3D Systems MJP EasyClean System. In addition, this 3D printer excels with 3D printing speeds up to three times faster than printers of the same class.
30. September 2019
Using additive manufacturing, Share your BICAR AG and the ZHAW Center for Product and Process Development in Zurich are creating a true innovation for the future with a sustainable, emission-free vehicle.
25. April 2019
Are you looking for a profitable way to produce prototypes and small series quickly and cost-effectively? Prototech Asia specializes in rapid prototyping and delivers answer to your most important questions for the successful implementation of your projects.
4. March 2019
CraftBot made an impression at the set of Blade Runner 2049: 10 CraftBot Plus 3D printers were used in the Hollywood blockbuster to create super realistic replica bodies.
14. February 2019
Our prototype mold solution was especially designed for the production of prototypes and small pilot series, from 200 to thousands of plastic parts. Similar to series one, the robustness, mechanical properties and manufacturability information are similar.
A medical company approached Prototech Asia with specific requirements for end user parts. The Rapid Tooling solution allowed delivery in 25 days and the customer still orders on-demand small series today due to their discontinuous needs.
5. February 2019
Within a few days from the CAD-model to real injection molded parts. Prototypes made from production grade materials. Economical production of small-batch injection molding runs. All with the help of additive manufactured injection molding tools and the agile production process of Injex.
23. January 2019
Figure 4 is a revolutionary 3D printing system, delivering ultra-fast print speeds and exceptional part quality at truly affordable prices, whether you’re an enterprise manufacturer or a small business.
24. December 2018
«Sintratec S2», the brand-new compact system for selective laser sintering (SLS), is suitable for manufacturing prototypes as well as optimizing application designs of small series.
28. November 2018
If time and costs involved in the production of prototypes pile up, it can become economically challenging for start-ups. The high-tech company Easelink from Graz, Austria, therefore relies on the 3D printing service. Components, such as gears, can be configured online and printed cost-effectively.
23. July 2018
Besides hobbyists, makerspaces and laboratories, fused deposition modeling (FDM) can be employed for professional applications with a variety of different thermoplastics. Fabru GmbH demonstrates the use of FDM to manufacture injection molds in PEEK.
9. July 2018
The world's leading helicopter manufacturer Airbus relies on the X400 3D printer from German RepRap to produce prototypes for windscreen wipers quickly and cost-effectively in comparison to conventional methods.
25. June 2018
How can waiting times for injection molded prototypes be reduced from 8 weeks to 3 - 5 days? By 3D printing injection molding tools from high-performance plastics instead of milling them from steal. Learn in the video how the process developed by igus works.
22. June 2018
We produce your individual component by additive manufacturing from lubricant-free and abrasion-resistant iglidur® high-performance plastics for your application in motion.
18. June 2018
By purchasing the German RepRap X1000, Tacata PlasTec was able to significantly reduce the development costs and production time of prototypes. And the printer enables them to produce large parts, such as door control systems for trucks, in one piece.
20. February 2018
The increasing need for innovation demands agile product development. We demonstrate how AM decreases turn-around time for injection molded prototypes from several weeks to a few days. As a demonstration, a plug housing is injection molded in 24 hours using the production material (PBT Valox 325).
15. February 2018
New development of a vacuum cleaner nozzle, which could already be thoroughly testet and optimised during the prototype phase. A distinct benefit of 3D-Printing: Short time-to-market provides competitive advantages.
13. December 2016
Conformal cooling systems in plastic injection molds lead to a higher quality of the plastic product in a shorter cycle time. This results in a higher quality product at lower cost.
12. September 2016
The Bavarian, mechatronic development and manufacturing partner GBN System has executed several functional samples in additive manufacturing for the Brandenburg start-up coronect.
28. June 2016
The concept tool is a prototype of an advanced drilling machine that sets a benchmark about what can be achieved today through state of the art 3D printing in terms of development and manufacturing.
19. May 2016
The training model supports future physicians in endoscopic surgery. It allows training of the processes and movements during an operation under realistic conditions.
Register now and join our live webinar on July 7 about additive manufacturing solutions for motorsports and learn how GF helps you to speed up your manufacturing processes!
Wednesday, 7. July 2021
| 16:00 - 17:00
Your certified 3D printing specialist for industrial and professional 3D printing solutions. Our range of hardware and software is complemented by our extensive range of services. We offer various solutions in SLS and FDM 3D printing. We can also offer you the fastest resin 3d printing system!
GF Casting Solutions has long-standing expertise in metal processing and serial production. With our manufacturing technologies, we develop and supply ready-to-mount solutions for customers in six market segments. With additive manufacturing, we provide even more speed and flexibility.
CHROMOS Group AG 3D Solutions is a sales partner and solution provider for 3D printers, 3D scanners and collaborative robots for the industry. As a solution provider we help companies to design and integrate system solutions in AM and Industry 4.0.
layer by layer to your part; selective laser sintering of small batch series and prototypes.
from Rümlang ZH,
Official Swiss representative of 3D printers from 3D-Systems. Specialized in the field of additive manufacturing with printer technologies such as DMP, SLS, DLP, MJP and CJP, as well as authorized Distributor and General Representative of Machine Tools by TTGroup & Indùstrias ROMI S.A..
KVT-Fastening is official distributor of German RepRap, Sintratec, Trumpf and Henkel. KVT-Fastening is able to offer the appropriate solution according to the customers’ needs – right in the spirit of our Solutioneering approach.
French company with a China based factory, Prototech Asia provides rapid prototyping and low-volume production services. Specialized subsidiary of Unimold Asia, our factory is located south of Shanghai. High quality plastic and metal parts at a very competitive price and timely manner.
3d-Printerstore.ch is Sales and Service partner for printer brands such as Raise3d, Craftunique, Intamsys, Builder3d, BCN3d, Flashforge and Formlabs. We also offer standard and special filaments for various applications from Spectrum, Clariant and many others.
Injex offers an injection molding service which is based on additive tooling. This reduces lead times for injection molded prototypes and small series from several weeks to a few days.
Discover the world of additive manufacturing with Sintratec and be inspired by our modular & scalable Selective Laser Sintering (SLS) system. The precision of our technology makes the most complex shapes a tangible reality, enabling users to design with an exceptionally high freedom of form!
igus® is the specialist for additive manufacturing of selb-lubricating high-Performance polymers for applications in motion
The Swiss AM Guide presents innovative ideas and possibilities in the field of additive manufacturing based on real-world application examples. The Swiss AM Guide a publication of the AM Network Switzerland and pd|z of ETH Zurich.
Limitless possibilities thanks to Additive Manufacturing in combination with mechanical post processing!
"Turning your visions into products" - As your system supplier in Medical Technology, Additive Manufacturing, Semiconductor industries and Mechatronic devices we guide you from idea over engineering until serial manufactured product.
from Buch am Buchrain,
We are the Swiss market and technology leader for the design, production and distribution of additively manufactured products. Additive technologies are our major focus.
from St. Gallen,
To use this functionality, you need to be logged in
We'll send you an email containing a direct access link.
You have been logged in.
We'll be suggesting suitable topics, exhibitors, articles, program items and further information.