NickelAlloy HX (Metal / Nickel-based alloys)

Get quotes for parts in NickelAlloy HX
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

Nickel alloy
Applied in space technologies, gas turbines. Solution annealing homogenises micro-structure, resolves internal stresses and improves strain while slightly reducing the stability

Standards

UNS N06002

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Manufacturing

Corrosion resistant


Register for free or Log in
for more information

Process

Manufacturing process

Laser Melting
Parts are built in a metal powder bed through a laser (or lasers) melting the metal powder layer-by-layer. Synonyms: Selective Laser Melting, SLM, Direct Metal Laser Sintering, DMLS, Laser Cusing

Physical, mechanical and thermal properties

Physical Properties

typical accuracy: 40 - 60 µm
typical accuracy: 0 +/-0.2 %
smallest wall thickness: 0.3 - 0.4 mm
surface roughness Ra: 3 - 8 µm

Mechanical Properties

ultimate tensile strenght: 850 +/-40 MPa
ultimate tensile strenght (y): 850 +/-40 MPa
ultimate tensile strenght (z): 720 +/-40 MPa
yield stress Rp 0.2%: 675 +/-50 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.