PA 2201 (Plastic / PA 12)

Get quotes for parts in PA 2201
This is a limited version. For full material information REGISTER FOR FREE or LOG IN to the Additively Application

Material

Vendor

EOS

Description

Polyamide 12
Completely functional parts of highest quality. Often used as substitution for casted parts. Because of ist biocompatibility also applied in prosthetics. Moveable connectors between parts can be directly produced. Certified for food grade admission: FDA 21 CFR

State of starting material

powder

Properties, applications and appearance

Field of application

Rapid Prototyping, Rapid Manufacturing

Chemical resistant


Register for free or Log in
for more information

Process

Manufacturing process

Laser Sintering
Parts are built on a plastic powder bed by a laser/ lasers that melt plastic powder layer by layer. Synonyms: SLS, Selective Laser Sintering

Physical, mechanical and thermal properties

Physical Properties

specific density: 0.93 g/cm3

Mechanical Properties

ultimate tensile strenght: 48 MPa
tensile modulus (Young's / E- ): 1,700 MPa
flexural modulus: 1,500 MPa
flexural modulus (z): 1,500 MPa


Register for free or Log in
for more information

Data source: EOS

ATTENTION: The presented values are provided by the material manufacturers and are only indicative. Realized material properties may differ from these value for several reasons. Additively does not guarantee the correctness of this information in any way.